Magic Lantern (firmware)

src: i.ytimg.com

Magic Lantern is a firmware add-on for various Canon digital single-lens reflex (DSLR) cameras and the EOS M. It adds features for DSLR filmmaking and still photography, and is free and open-source.

Magic Lantern was originally written for the Canon EOS 5D Mark II by Trammell Hudson in 2009 after he reverse engineered its firmware. He ported it to the Canon EOS 550D in July 2010. There are now versions for many other Canon DSLRs and the current principal developer is known as A1ex.

Because installing Magic Lantern does not replace the stock Canon firmware or modify the ROM but rather runs alongside it, it is both easy to remove and carries little risk. The camera checks a "boot flag" in its re-writable memory, and if set, reads from a memory card to get the additional firmware routines. Each time the camera is started, there is an option to disable Magic Lantern.

Video Magic Lantern (firmware)

History

Magic Lantern firmware was originally written for the Canon EOS 5D Mark II by Trammell Hudson in 2009 after he reverse engineered its firmware. He ported it to the Canon EOS 550D in July 2010.

Starting in September 2010, a person using the name "A1ex" on the CHDK (Canon Hack Development Kit) website forum and other people ported Magic Lantern to the Canon EOS 50D, 60D, 500D and 600D. As of August 2017 support for the Canon EOS 5D, 5D Mk III, 6D, 7D, 60Da, 650D, 700D, and 1100D DSLRs and the mirror-less EOS M had also been added. Later mirrorless cameras are not supported because they use a codebase similar to Canon PowerShot cameras rather than Canon EOS cameras; therefore CHDK ports are planned.

Originally developed for DSLR filmmaking, Magic Lantern's features have expanded to also include those for still photography.

Maps Magic Lantern (firmware)

Features

• Firmware and source code is released under the GNU General Public License.
• Audio controls, on-screen audio meter, audio monitoring via A/V cable
• HDR video, bitrate control, FPS control, auto-restart
• Precise ISO, White Balance, and Shutter Speed controls
• Zebras, false colour, raw histogram, waveform, spot meter, vectorscope
• Focus peaking, 'magic zoom', trap focus, rack focus, follow focus, motion detection
• Automatic Exposure Bracketing, focus stacking
• Intervalometer, bulb timer (up to 8 hours), bulb ramping
• Custom cropmarks/on-screen graphics
• On-screen focus and DOF info, CMOS temperature, clock
• Customizable menus and scripting
• Customizable "P" Program mode
• 14-bit raw video on some DSLRs
• Dual-ISO for increased dynamic range up to about 3 EV, with trade-off of somewhat less resolution and more complicated post processing involving cr2dng
• Auto-Dot-Tune on some DSLRs for automatic micro-focus-adjustment to calibrate lens and body (5D Mk II, 6D, 50D, 5D Mk III and 7D)

src: cdn.fstoppers.com

Original Canon warranty

Because installing Magic Lantern does not replace the stock Canon firmware or modify the ROM but rather runs alongside it, it is both easy to remove and carries little risk. Canon has not made any official statements regarding the add-on firmware, either on the subject of warranty or on the features. In response to emails Canon has stated that while their warranty doesn't cover damage caused by third party firmware it will cover unrelated issues such as malfunctioning buttons even if third party firmware has been installed.

src: i.ytimg.com

See also

• AXIOM (camera)

src: i.pinimg.com

References

src: i.ytimg.com

External links

• Official website

Source of the article : Wikipedia